Oneida Air Systems - The Dust Deputy

What is the Dust Deputy?
The Dust Deputy is an extremely efficient, cyclonic pre-separator for vacuums. It's constructed of heavy-gauge steel and continuously seam-welded. Trap dust in the barrel and NOT in your shop vacuum. The Dust Deputy will filter 99% of sanding dust. Only 1% goes into the vacuum. Extend the life of your shop vacuum and your filters. Also want to add HEPA filtration to your shop vacuum? Purchase a Cleanstream® Filter and enjoy the benefits of HEPA filtration.
Click the image on the left to enlarge, and click the image on the right to view a video of the Dust Deputy in action.
Note: The Dust Deputy is not for use with highly explosive dust. Check all applicable federal, state and local codes.

Video

The Dust Deputy - Tired of using your shop vacuum and getting poor results? Oneida's new patent pending Dust Deputy will transform your shop vacuum and the way you work! Take a look at a brief video that shows the Dust Deputy in action.

What Can I Use The Dust Deputy For?
Editorials and Magazine Reviews

What the Dust Deputy Does For You
1. Increased Suction Power: Most shop vacuums clog up rapidly.With most of the waste getting trapped in the Dust Deputy's drum, the filters stay cleaner and power drop-off is much less.
2. Fine Dust Separation: Most shop vacuums can't capture the finest dust which is the most harmful. By retrofitting the Cleanstream® HEPA filter to your shop vacuum, you can capture 99.97% of the remaining waste down to .3 microns.
3. Longer Life: With less filter loading and true HEPA filtration, you'll get longer filter life.

Customer Experience with the Dust Deputy:
"I continue to use the Dust Deputy everyday, and am amazed by its performance. No longer do I feel that I am poisoning myself during restoration work. Bravo! A major problem is solved. Before Deputy, my shop vac filter would plug in 5 minutes. Now, after hours of routine job-site clean-up, there is still enough airflow to suck up a penny, which is my acid test. The Dust Deputy cyclone feels as if it is built of boiler plate - put it in your will for your grandchildren." - LM

"I was very skeptical when I ordered the Dust Deputy thinking no way would it trap fine dust particles but I have been so thrilled with my stationary Oneida dust collection system I thought I'd try one to use between my remotely located 6 x 48 belt sander and my Fein vacuum.
I just finished over 3 hours of 220 grit sanding on my 6 x 48 and was I surprised to find over a quart of fines in my Dust Deputy. That amount would have surely fouled my Fein filter part way through the project. Upon checking the Fein I found only a few large solids in the bottom of the tub that I picked up when I vacuumed the floor.
Nice product--well done" - CH